Product Introduction
Hexahydrobenzene is a typical non-polar aliphatic hydrocarbon solvent. Having good solubility and moderate volatility, it is an important industrial solvent and a key raw material for nylon series products such as caprolactam and adipic acid
Product Advantages
Excellent solubility
Hansen solubility parameters as belowδD=16.8, δP=0.0, δH=0.2), it's typical non-polar solvents. Cyclohexane has excellent solubility for oils, waxes, rubber, asphalt, and various non-polar or weakly polar resins, making it an effective cleaning and extraction solvent
Middle volatility
The boiling point is about 81℃, the evaporation rate is middle like between heptane and toluene, which can ensure a certain drying speed and provide a certain operating time.
Lower Toxicity than benzene
In degreasing and paint stripping, its toxicity (especially bone marrow suppression and carcinogenicity) is significantly lower than benzene, making it a reasonable choice.
Product Application
Chemical synthesis raw materials
The production of nylon monomers, what is the primary and largest application of Cyclohexane.
Industrial solvents
Used as a solvent for the rubber, coating, and resin industries, as well as for the extraction and cleaning of oils, fats, and waxes.
Adhesives and paint diluents
As a non-polar solvent, Hexahydrobenzene is used to adjust the viscosity of certain adhesives and coatings.
Package & Storage
Package
160kg drum, 200kg drum, IBC drum, ISO tank container
Storage
Keep the container sealed, avoid contacting with moisture.
Stored in a cool and dry place, better under 29℃.
Avoid direct sunlight.
Keep away from heating or fire, no mix-storage with oxidizer.
FAQ
Q: What is the production period after order confirmation?
A: The custom production cycle is typically 7-10 business days, depending on order quantity and requirements.
Q: Can we attach our neutral labels or OEM brand on the packaging barrels?
A: Yes. We can design and print labels as per your request (including GHS symbols) and omit factory information to protect your distribution channels.
Q: Do you accept third-party inspections (e.g., SGS, BV)?
A: Yes, we fully accept third-party inspections. You may commission SGS or BV personnel to sample and inspect at our factory before shipment, with the inspection costs borne by the buyer.
Product Specification
Boiling point: 80.7℃
Melting point: about 6.5℃
Flash point: -18℃ (closed cup)
Density: Approximately 0779 g/cm ³ (20℃)
Solubility: Insoluble in water, miscible with most organic solvents such as ethanol, ether, acetone, benzene, carbon tetrachloride, etc.